Car Battery Cast on Strap Machine
This machine need two operator and 4 process; one operator assemble the load & tidy the plate;automatic brush ear of the plate and infusion the weld liquid; automatic cast-on-strap and pole; Last step is insert the plate into the container directlty.
The cos rotate at four sizte. The process control by PLC.
The lead liquid transport by spiral vane pump, lead switch in lead port, capacity of the lead pot is one ton, only change the model when you need to change the battery style.
Power: AC 380.50Hz/60Hz
Air Source:0.6Mpa 0.1M3/min
Coiling Water: 0.2Mpa 20l/min
Capacity: 60-120 pcs/hour
Electricity Power: 35kw.